Omron E5EC User Manual

Revision History
14
E5@C Digital Temperature Controllers User’s Manual (H174)
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Revision code Date Revised content
01 December 2011 Original production
02 January 2012 Page 9: Made correction in Precautions for Safe Use.
03 December 2012 • Made changes accompanying the addition of programless
communications and component communications (version 1.1).
• Added E5EC/E5AC Digital Controllers with position-proportional control
and E5AC Digital Controllers. (version 2.0).
• Corrected mistakes.
04 July 2013 • Added version 1.0 of the E5DC.
• Corrected mistakes.
05 December 2013 • Added E5CC-U.
• Improved autotuning for heating/cooling control.
• Added Mitsubishi FX-series PLCs and Keyence PLCs to information on
programless communications (version 2.1).
• Corrected mistakes.
06 April 2014 • Added version 2.2 of the E5GC.
• Added an analog input type and simple transfer function for the
E5CC-U (version 2.2).
• Corrected mistakes.
07 July 2014 • Added E5DC-U.
• Added simple transfer function and status message function to the
E5DC (version 2.2).
• Added seconds as the unit for the soak time (version 2.2).
• Added Lloyd’s standards for the E5DC.
• Corrected mistakes.
08 August 2014 • Added the Valve Opening Monitor Selection and FB Moving Average
Count parameters for E5EC/E5AC-PR@-8@@ (version 2.2).
09 June 2015 Page 4-46: Changed figure for burnout at bottom of page.
Pages 5-55 and 6-89: Added note *5 and references to it in table.
Page 5-60: Changed level to Operation Level for Remote SP Monitor.
Page 5-61: Changed level in first sentence of Remote SP Monitor to
Operation Level.
Page 6-5: Added note below table for Changed Parameters Only.
Page 6-6: Added note above table for Parameter Mask Enable.
Page 6-30: Changed conditions given to right of “Manual Reset Value.”
Page 6-56: Added note at bottom of page.
Page 6-70: Added note above table.
Page 6-93: Added note above table in Display Refresh Period.
10 March 2016 • Added information on version 2.1 of the E5@C-B.
• Corrected mistakes.
11 July 2016 • Corrected mistakes and added explanations.
12 October 2017
• Adde
d E5@C-B Digital Controllers with current outputs.
• Corrected mistakes.
13 March 2018 • Added precautions for wiring of screw terminal block types.
14 April 2019 • Added information on version 2.2 of the E5DC-B.
• Corrected mistakes.
H174-E1-14
Revision code
Cat. No.

Omron E5EC Specifications

General

Brand	Omron
Model	E5EC
Category	Temperature Controller
Language	English