Omron NB7W-TW**B series User Manual

10 Connecting to PLC of GE Fanuc Automation Inc.
10-2
NB-series Programmable Terminals Host Connection Manual (V108)
10-1 Serial Port Communication
* Series 90 Product Supporting Break-free SNP Feature is as follows:
Note When you use the above-mentioned CPU(s) for communication, be sure to update it (them) to the specified version(s) in
order to make communications with GE Fanuc Series SNP protocol.
Series CPU Link Module Driver
GE Fanuc Series 90-30 IC693CPU311
IC693CPU313
IC693CPU321
IC693CPU323
IC693CPU331
IC693CPU341
IC693CPU350
IC693CPU351
IC693CPU352
IC693CPU360
IC693CPU363
IC693CPU364
IC693CPU374
IC693CSE311
IC693CSE313
IC693CSE323
IC693CSE331
IC693CSE340
Serial Connector on Power Supply GE Fanuc Series SNP
(Break-free mode)*
IC693CPU311
IC693CPU313
IC693CPU321
IC693CPU323
IC693CPU331
IC693CPU340
IC693CPU341
IC693CPU350
IC693CPU360
IC693CPU364
Connector on Power Supply GE SNP-X
IC693CMM311
IC693CPU351
IC693CPU352
IC693CPU363
Connector on Power Supply
Port1 on CPU unit
Port2 on CPU unit
IC693CMM311
IC693CPU374 Port on Power Supply
IC693CMM311
VersaMax Series CPU001/002/005
CPUE05
RS232 on port1
RS422 on port2
VersaMax Micro &
Nano Series
IC200UAL004/005/006
IC200UDD110/120/212
IC200UDR005/006/010
IC200UAA007
IC200UAR028
RS232 on port1
RS422 on port2
Product Break-free SNP
Series 90-30 CPU350-364 Support on all serial communication ports starting with firmware release 9.00
Series 90-30 CPU311, 313, 323, 331, 341 Supported starting with firmware release 8.20

Omron NB7W-TW**B series Specifications

General

Brand	Omron
Model	NB7W-TW**B series
Category	Touch terminals
Language	English