11 Connecting to Keyence PLCs
11-4
NB-series Programmable Terminals Host Connection Manual (V108)
11-3 Communication Setting
PT default communication parameters: 9600bps (Baud Rate), 8 (Data Bit), even (Parity Check) and 1
(Stop Bit)
As showed in the right of dialog box as below, PLC Communication Time Out, Max interval of word
block pack, Max interval of bit block pack, Max word block package are varied with PLC protocol. Gen-
erally, the default values are selected.
RS232 Communication
Note The Baud Rate supports 9600, 19200, 38400, 57600 and 115200.
When Keyence KV-3000 Communication Protocol is used, the setting of PLC is not required.
11-3-1 When Using Keyence KV-3000 Communication Protocol
PT Settings
PLC Settings
To Next Page
Loading...
Need help?
General
