Revision-1
NB-series Programmable Terminals Host Connection Manual (V108)
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Revision code Date Revised content
01 October 2011 Original production
02 April 2012 Adding descriptions of Modbus network interface
communication and Modbus protocol.
03 August 2012 Adding descriptions of connecting to PLCs manufactured
by Allen-Bradley and GE Fanuc Automation INC.
04 December 2012 Correction related to the backlight lamp and rubber
packing maintenance in Precautions for Safe Use.
05 December 2012 • Adding descriptions of the power supply and wire
connection in Precautions for Safe Use.
• Adding descriptions of the serial port COM.
• Adding descriptions of E5CC/E5EC and 3G3MX2
connection using Modbus protocol.
06 April 2013 Changes and corrections
07 August 2013 Adding descriptions of support models
08 November 2013 Changes and corrections
09 February 2014 Adding descriptions of support models
10 July 2014 Adding descriptions of support models
11 October 2014 Adding descriptions of support models
12 April 2016 Changes and corrections
13 October 2016 Changes and corrections
14 March 2017 Changes and corrections
15 July 2017 Adding descriptions of support models
Cat. No. V108-E1-
Revision code
To Next Page
Loading...
Need help?
General
