Omron NS5-MQ00 V2 Series User Manual

6-3 PT Settings
•
•
Use the following input format to set the date:
yyyy.mm.dd (yyyy: year, mm: month, dd: day)
Set the year using four digits.
Example: Set March 15, 2002 as 2002.3.15. (Adding 0 prefix to single-digit settings is not required.)
Use the following input format to set the time.
hh.mm.ss (hh: hour, mm: minute, ss: second)
Set the year using the 24-hour clock.
Example: Set 06:01:01 p.m. as 18.1.1. (Adding 0 prefix to single-digit settings is not required.)
8. Press the Enter Button to enable the settings.
6-3-7 Printer Type
If there is a printer connected to the PT, select the printer’s control method.
Setting item Details
ESC/P Raster Sets the printer’s control method to ESC/P Raster. Use this setting if
mainly using Epson printers.
BJ Raster Sets the printer’s control method to BJ Raster. Use this setting if
mainly using Canon printers.
1. Select either ESC/P Raster or BJ Raster in Print Control.
9. After setting, press the Write Button to save the setting.
6-24

Omron NS5-MQ00 V2 Series Specifications

General

Brand	Omron
Model	NS5-MQ00 V2 Series
Category	Touch terminals
Language	English