Appendix 9 List of Optional Products
The Unit’s resistance to chemicals is as shown below.
Resistant Non-resistant
Boric acid
Sulfuric acid
Nitrogen
Ammonia gas
Carbon dioxide
Phenol
Glycerin
Aqua ammonia
Calcium chloride
Developing solution (Sodium thiosulfate)
Acetaldehyde
Lard
Hexane
Lubricating oil
Benzine
Butane
Carbonic acid
Chloric acid
Naphthaline
Soybean oil
Toluene
Contact an OMRON representative for information on resistance to any chemicals not
included in the table above. (The product can be used with chemicals to which silicon
rubber is resistant, even if those chemicals are not included in the “Resistant” column in
the table.)
A-9-4 Replacement Battery: CJ1W-BAT01
This is a lithium battery for backing up the contents of the memory.
CJ1W-BAT01
Model Specifications
CJ1W-BAT01 Replacement Battery for NS12-V1/V2, NS10-V1/-V2, NS8-V1/-V2, NS5-V1/-V2
A-9-5 Recommended Memory Cards
HMC-EF372 and HMC-EF672
A-9-6 Recommended Memory Card Adapter: HMC-AP001
The Memory Card is an external memory that can save and read screen data, log data,
and system programs between the PT and computer. By using the HMC-AP001, this data
can be exchanged with computers that are connected to PC Cards.
The memory capacity depends on the model of the Memory Card used.
Model Capacity
HMC-EF372 30 Mbytes
HMC-EF672 64 Mbytes
A-55
To Next Page
Loading...
Need help?
General
