Regular Payload Series-Hardware Installation Manual TM5 Series Hardware Version: 3.2 70
The robot arm carton contains:
Table 19: The Robot Arm Carton Contents
The control box carton contains:
(One large calibration plate and one small calibration
plate. Peel the protective wrap off before using.)
*The Calibration Plate comes only with TM Robots
fitted with the hand-eye camera. No Calibration Plate
includes in the following series:
TM5X-700 / TM5X-900
(One 8-pin digital I/O cable and one 5-pin analog I/O
cable)
Length: 100 cm
Robot arm
Control box
Calibration Plates
IO cables