Omron SYSMAC FH Series Hardware Setup Manual

3 Configuration
3 - 44
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
*1. This data values are for reference only and not guaranteed values.
 Bend resistant Camera Cable: FZ-VSB3
*1. Cable is available in 2 m/3 m/5 m/10 m.
*2. Each camera cables has polarity. Please ensure that the name plate side of the cable is connected to the controller.
 Bend resistant Right-angle Camera Cable: FZ-VSLB3
*1. Cable is available in 2 m/3 m/5 m/10 m.
*2. Each camera cables has polarity. Please ensure that the name plate side of the cable is connected to the controller.
Additional Information
We have the 2D CAD data or 3D CAD data.
You can download CAD data from www.fa.omron.co.jp.
3-3-2 Bend resistant Camera Cable and Bend resistant Right-angle Camera Cable
Specification
Model FZ-VSB3 (2 m) FZ-VSLB3 (2 m)
Shock resistiveness (durability) 10 to 150 Hz
Single amplitude 0.15 mm
3 directions, 8 strokes, 4 times
Ambient temperature range Operation and storage: 0 to 65°C (with no icin
g or condensation)
Ambient humidity range Operation and storage: 40 to 70%
RH (with no condensation)
Ambient atmosphere No corrosive gases
Material Cable sheath, connector: PVC
Bend performance *1 U-bend flexing: 1 million times or more
Bending radius: 50 mm
Stroke: 300 mm
Speed: 30/minute
Minimum bending radius 69 mm
Weight Approx. 180 g
Dimensions
(*2)
(9)
(11)
26-pin
rectangular connector
(25)
8.0 dia.
(40)
L (*1)(30)
(100)
(*2)
(9)
26-pin
rectangular connector
26-pin
rectangular connector
8.0 dia.
(100)
L (*1) (30)(34)
(10)
(40)
(25)
(25)
(18)
(11)

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English