Omron SYSMAC FH Series Hardware Setup Manual

3 - 27
3 Configuration
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
3-2 Camera
3
3-2-1 High-speed digital CMOS Camera (FH-S camera series)
3-2 Camera
Precautions for Safe Use
About connection of FH-1000, FH-3000, or FH-L series Sensor Controller and
FH-SC12/FH-SM12 (12 megapixels camera).
• When you connect the Sensor Controller to the FH-SC12/FH-SM12, do not ground the posi-
tive terminal of DC24V power source. The interna
l circuit is possible to be given damage, it
can be cause the failure.
3-2-1 High-speed digital CMOS Camera (FH-S camera series)
Specification
Model FH-SM FH-SC FH-SM02 FH-SC02
Image elements CMOS image elements (1/3-inch equivalent) CMOS image elements (2/3-inch equivalent)
Color/Monochrome Monochrome Color Monochrome Color
Effective pixels 640 (H) × 480 (V) 2040 (H) × 1088 (V)
Imaging area H × V
(op
posing corner)
4.8 × 3.6 (6.0 mm) 11.26 × 5.98 (12.76 mm)
Pixel size 7.4 (μm) × 7.4 (μm) 5.5 (μm)
× 5.5 (μm)
Shutter function Electronic shutter:
Shutter speeds can be set from 20 μs to
100 ms.
Electronic shutter:
Shutter speeds can be set from 25 μs to 100
ms.
Partial function 1 to 480 lines 2 to 480 lines 1 to 1088 lines 2 to 1088 lines
Frame rate
(Image Acquisition
Ti
me)
308 fps (3.3 ms)
219 fps (4.6 ms)
*1
*1. Frame rate in high speed mode when the camera is connected using two camera cables.
Lens mounting C mount
Field of vision,
installation distance
Selecting a lens according to the field of vision and installation distance
Ambient temperature
range
Operating: 0 to 40°C,
Storage: -25 to 65°C (with no icing or condensation)
Ambient humidity
range
Operating and storage: 35% to 85%RH (with no condensation)
Weight Approx. 105 g Approx. 110 g
Accessories Instruction Sheet

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English