2 Overview of FH/FZ5 series
2 - 4
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
Vision System FH-1000 and FH-3000 series is the BOX type Sensor Controller having functions,
high-speed, and safety, reliability, and maintainability of a machine embedded controller.
This series includes the previously supported imag
e processing functions and with the addition of new
EtherCAT support, this series now also has the high-speed connectivity needed for connection with
programmable logic controllers and other devices with similar I/O requirements for EtherCAT communi-
cation.
With a maximum of 8 camera connections possible, h
igh-speed image transfer, faster than previously
available, is now possible than herebefore.
OMRON provides Sysmac device which
unified communication specification or deigned User Interface
specification. Vision System FH-1000 and FH-3000 series can be easily connected Sysmac device, i.e.
NJ/NX/NY-series Controller or EtherCAT slave. Therefore the optimum functions or operations can be
realized.
The following is an example system configuration.
Example of the FH Sensor Controllers (4-camera type)
*1. To use STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum
foil tape) for EtherCAT and RJ45 connector.
*2. To use STP (shielded twisted-pair) cable of category 5 or higher for Ethernet and RJ45 connector.
2-1-2 FH-1000/FH-3000 Series
EtherCAT Connection for FH Series
Sysmac Studio
Standard Edition
Vision Edition
EtherCAT Cables
*1
EtherCAT junction slaves
Ethernet Cables
*2
Vision System
FH Sensor Controllers
Cameras
special cable for cameras
Another slave
(With built-in EtherCAT slave function)
EtherCAT Cables
*1
NJ/NX/NY-series
Controller
Incremental
rotary encoder
special cable
special cable for Touch Panel Monitor
cable tor Touch Panel interface
special cable for I/O
Touch Panel Monitor
FH-MT12
PLC for
I/O control
Trigger input
sensor
Lighting
Controllers
Lighting
Controllers
External
Lightings
To Next Page
Loading...
Need help?
General
