EasyManuals Logo
Home>Onkyo>Amplifier>A-9130

Onkyo A-9130 User Manual

Onkyo A-9130
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
En
Preparations
When connecting an Onkyo CD player or tuner to the RI
REMOTE CONTROL jack on this unit (p11) and using the
RI function, you need to make RI function settings.
1. Press SETUP on the remote controller.
0 If this unit is set to be used as a power amplifier, the
SETUP button will not work. Check the setting. (p19)
2. Press D/C on the remote controller several times to
switch to the RI function setting mode.
0 When connecting a CD player, make it so that one of the
"D1" and "LINE 1" indicators blinks and the other one
lights.
0 When connecting a tuner, make it so that one of the "D2"
and "LINE 2" indicators blinks and the other one lights.
3. Press B/A on the remote controller to switch the setting.
(When connecting a CD player)
- When connecting to the DIGITAL IN COAXIAL D1 jack
(default value): The "D1" indicator blinks and "LINE 1"
lights.
-When connecting to the LINE IN 1 jack: The "LINE 1"
indicator blinks and "D1" lights.
(When connecting a tuner)
-When connecting to the DIGITAL IN OPTICAL D2 jack
(default value): The "D2" indicator blinks and "LINE 2"
lights.
-When connecting to the LINE IN 2 jack: The "LINE 2"
indicator blinks and "D2" lights.
4. To exit the settings, press SETUP.
0 The setting mode ends after 5 seconds elapse with no
operations performed.
RI function settings
(CD)
3
1
2
(Tuner)
Linked D2
Linked LINE IN 2
Linked D1
Linked LINE IN 1
SETUP
///
(BLINKING) (LIGHTING)
(BLINKING) (LIGHTING)
SN29403409_A-9130_En_1806XX.book 15 ージ 018年7月12日 木曜日 午後8時45

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo A-9130 and is the answer not in the manual?

Onkyo A-9130 Specifications

Audio Specifications IconAudio Specifications
rated output power60 W at 4 ohms, 20 Hz-20 kHz
dynamic power260 W (3 ohms, Front)
input sensitivity and impedance200 mV/47 kohms (LINE (RCA))
frequency response10 Hz - 100 kHz
signal to noise ratio106 dB (IHF-A, LINE IN, SP OUT)
speaker impedance4 ohms - 16 ohms
Power IconPower
power supplyAC 220-230 V, 50/60 Hz
power consumption150 W
standby power consumption0.2 W
Weight and Dimensions IconWeight and Dimensions
dimensions435 mm x 129 mm x 330 mm
dimensions (inches)17-1/8" x 5-1/16" x 13"
weight8.0 kg (17.6 lbs)

Related product manuals