Onkyo A-9130 User Manual

9
En
Preparations
a Subwoofer Cable
You can also connect a Powered subwoofer to the
SUBWOOFER PRE OUT jack to boost bass playback even
more. Use a subwoofer cable for connection.
You can switch the subwoofer output setting between auto/
on/off according to your preference. Refer to "Subwoofer
output settings" (p17) for details.
0 It is recommended to set this off if you are not using a
subwoofer.
a Digital Optical Cable, b Digital Coaxial Cable
Use a Digital coaxial cable to connect a player to the
DIGITAL IN COAXIAL D1 jack. Alternatively, use a Digital
optical cable to connect a player to the DIGITAL IN
OPTICAL D2 jack. Refer to "Connecting with Onkyo RI
Components" (p11) to use the RI function.
0 Only PCM audio is supported for input through the
DIGITAL IN OPTICAL/COAXIAL jacks. Set the audio
output on the playback device to output PCM.
Connecting a Powered subwoofer
a
Powered subwoofer
Connecting players (DIGITAL IN
connection)
CD
b
a
Tuner
SN29403409_A-9130_En_1806XX.book 9 ページ ２０１８年７月１２日 木曜日 午後８時４５分

Onkyo A-9130 Specifications

Audio Specifications

rated output power	60 W at 4 ohms, 20 Hz-20 kHz
dynamic power	260 W (3 ohms, Front)
input sensitivity and impedance	200 mV/47 kohms (LINE (RCA))
frequency response	10 Hz - 100 kHz
signal to noise ratio	106 dB (IHF-A, LINE IN, SP OUT)
speaker impedance	4 ohms - 16 ohms

Power

power supply	AC 220-230 V, 50/60 Hz
power consumption	150 W
standby power consumption	0.2 W

Weight and Dimensions

dimensions	435 mm x 129 mm x 330 mm
dimensions (inches)	17-1/8" x 5-1/16" x 13"
weight	8.0 kg (17.6 lbs)