EasyManuals Logo
Home>Onkyo>Amplifier>A-9130

Onkyo A-9130 User Manual

Onkyo A-9130
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Basic Operations
When you turn the DIRECT feature on (default value), the
unit bi-passes the tone control circuits that adjust the bass
and treble, taking the shortest route which favors sound
quality.
0 PHASE MATCHING BASS/BASS/TREBLE cannot be
adjusted when DIRECT feature is on.
1. Press DIRECT on the main unit or the remote controller to
switch on or off. The DIRECT indicator lights when on.
PHASE MATCHING BASS
Turning the PHASE MATCHING BASS function on
maintains smooth and powerful bass reproduction while
effectively keeping the mid-range clear and making vocals
and strings stand out (The default value is “off”).
0 This cannot be set when DIRECT is on (default value).
Press DIRECT to turn the DIRECT indicator off before
operating. Note that the PHASE MATCHING BASS
setting reverts to the previous setting when the DIRECT
function is turned off.
1. Press PHASE MATCHING BASS on the main unit or PM
BASS on the remote controller to switch on or off. The
PHASE MATCHING BASS indicator lights when on.
BASS (main unit only)
0 This cannot be set when DIRECT is on (default value).
Press DIRECT to turn the DIRECT indicator off before
operating.
1. Turn the BASS -/+ controller to enhance or moderate the
bass.
TREBLE (main unit only)
0 This cannot be set when DIRECT is on (default value).
Press DIRECT to turn the DIRECT indicator off before
operating.
Using the Direct Function
1
DIRECT
Adjusting the sound quality and
balance
1
PMBASS
SN29403409_A-9130_En_1806XX.book 18 ージ 018年7月12日 木曜日 午後8時45

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo A-9130 and is the answer not in the manual?

Onkyo A-9130 Specifications

Audio Specifications IconAudio Specifications
rated output power60 W at 4 ohms, 20 Hz-20 kHz
dynamic power260 W (3 ohms, Front)
input sensitivity and impedance200 mV/47 kohms (LINE (RCA))
frequency response10 Hz - 100 kHz
signal to noise ratio106 dB (IHF-A, LINE IN, SP OUT)
speaker impedance4 ohms - 16 ohms
Power IconPower
power supplyAC 220-230 V, 50/60 Hz
power consumption150 W
standby power consumption0.2 W
Weight and Dimensions IconWeight and Dimensions
dimensions435 mm x 129 mm x 330 mm
dimensions (inches)17-1/8" x 5-1/16" x 13"
weight8.0 kg (17.6 lbs)

Related product manuals