Name: Onkyo A-9130
Brand: Onkyo
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Before use

1. Í ON/STANDBY button

2. Remote control sensor: Receives signals from the remote

controller.

0 The signal range of the remote controller is within

about 16y/5 m, at an angle of 20° on the perpendicular

axis and 30° to either side.

3. Volume controller

4. Input source indicators: The indicators light according to

the selected input source.

0 The indicator for the selected input source blinks when

MUTING (p6) is active.

5. INPUT dial: Switches the input source to be played.

6. BASS -/+ controller: Enhance or moderate the bass range

of the speakers. (p18)

7. TREBLE -/+ controller: Enhance or moderate the treble

range of the speakers. (p18)

8. BALANCE L/R controller: Adjust the left/right audio

balance. (p19)

9. DIRECT button/indicator: Switch the DIRECT feature on

and off. The indicator lights when the DIRECT feature is

on. (p18)

10.

PHASE MATCHING BASS button/indicator: Switch the

PHASE MATCHING BASS feature on and off. The

indicator lights when the PHASE MATCHING BASS

feature is on. (p18)

11.

MAIN IN button/indicator: Button for making settings

when this unit is used as a power amplifier. The indicator

lights when the mode to use this unit as a power amplifier

is on. (p19)

12.

PHONES jack: Connect stereo headphones with a

standard plug (Ø1/4"/6.3 mm diameter).

Front Panel

Part Names



 

 

SN29403409_A-9130_En_1806XX.book 4 ページ２０１８年７月１２日　木曜日　午後８時４５分

Questions and Answers:

Need help?

Do you have a question about the Onkyo A-9130 and is the answer not in the manual?

Onkyo A-9130 Specifications

Audio Specifications

rated output power	60 W at 4 ohms, 20 Hz-20 kHz
dynamic power	260 W (3 ohms, Front)
input sensitivity and impedance	200 mV/47 kohms (LINE (RCA))
frequency response	10 Hz - 100 kHz
signal to noise ratio	106 dB (IHF-A, LINE IN, SP OUT)
speaker impedance	4 ohms - 16 ohms

Power