Oriental motor BMU Series User Manual

Cables and peripheral equipment(sold separately)
−40−
12 Cables and peripheral equipment
(sold separately)

Power supply cable
This cable is used to connect the driver to the power supply.
•
For single-phase 100 VAC (with plug)
* •
For single-phase 100-120/200-240 VAC
•
For three-phase 200-240 VAC
Length [m (ft.)] Model Length [m (ft.)] Model Length [m (ft.)] Model
1 (3.3)
CC01AC03P
1 (3.3)
CC01AC03N
1 (3.3)
CC01AC04N
2 (6.6)
CC02AC03P
2 (6.6)
CC02AC03N
2 (6.6)
CC02AC04N
3 (9.8)
CC03AC03P
3 (9.8)
CC03AC03N
3 (9.8)
CC03AC04N
These cables are not shielded cables. If conformance to the EMC Directive is required, refer to "13.5 Conformity to the
EMC." (p.44).
*
A plug is attached to the power supply cables for the single-phase 100 VAC type.
They can be used in Japanese domestic market only.

Connection cable
This cable is used to extend the wiring distance between the driver and motor. The wiring distance between the motor
and driver can be extended to a maximum of 10.5 m (34.4 ft.).
The motor cables, connection cables and exible connection cables are shielded cables which have taken measures
against the electrical noise.
The connection cable for relay can be used by connecting up to 2 pieces.
z
Connection cable
z
Flexible connection cable
Length [m (ft.)] Model Length [m (ft.)] Model
1 (3.3)
CC01BL2
1 (3.3)
CC01BL2R
2 (6.6)
CC02BL2
2 (6.6)
CC02BL2R
3 (9.8)
CC03BL2
3 (9.8)
CC03BL2R
5 (16.4)
CC05BL2
5 (16.4)
CC05BL2R
7 (23.0)
CC07BL2
7 (23.0)
CC07BL2R
10 (32.8)
CC10BL2
10 (32.8)
CC10BL2R

Mounting brackets for electrical circuit products
Mounting brackets convenient for installation of the driver are provided.
According to applications, the type of the mounting brackets can be selected from for DIN rail-installation type or for
panel-installation type.

Watertight and dust-resistant type Front cover
This is a cover to protect the front panel of the driver. Also, it can be used for preventing wrong operations of the front
panel. The degree of protection is IP64.
About motor mounting brackets (
SOL
)
When the mounting bracket and motor are secured, use so that the direction of the connector for cable connection is
installed upward or sideways against the installation surface. Installing the motor connector to the downward direction is
not recommended since the motor connector is come into contact with the mounting bracket or installation surface.

Oriental motor BMU Series Specifications

General

Brand	Oriental motor
Model	BMU Series
Category	Engine
Language	English