Oriental motor BMU Series User Manual

Convenient functions
−25−
8 Convenient functions
8.1 Functions list
The following functions are available for this product.
Functions Description
Reference
page
Display
Rotation speed
Displays the rotation speed of the motor output shaft.
30, 28
Displays by converting the motor rotation speed into the rotation speed
of the gearhead output shaft.
Conveyor transfer speed
Displays by converting the motor rotation speed into the transfer speed
of the conveyor drive.
31, 28
Speed increasing
Displays by converting the motor rotation speed into the increasing
speed.
Load factor
Displays the load torque applied on the motor output shaft as a
percentage (%).
30
Operation data No.
Displays the operation data number that is presently operating.
Alarm
Displays the alarm information by the alarm code.
30, 34
Displays the alarm records.
Warning
Displays the warning information by the waning code.
30, 37
Displays the warning records.
I/O signals
Checks whether a signal is input.
30
Checks whether a signal is output.
Setting
Rotation speed
Sets the motor rotation speed using the setting dial.
20
Sets the motor rotation speed in the operation data.
31
Acceleration time,
deceleration time
Sets using the acceleration/deceleration time potentiometer.
32
Sets in the operation data.
31
Lock function
Disables an operation with the setting dial so that the set data
cannot be changed.
33
Operation using
programmable controller
Operates by inputting signals externally.
21
Disables an operation with the setting dial on the front panel.
Operates with multiple speeds. (Up to 4 speeds)
23
Limiting the setting range
of the rotation speed
Sets the upper limit and lower limit of the rotation speed.
33
Slight position-keeping
The load position can be kept at motor standstill.
34
Changing the function for
I/O signals
Changes the functions assigned to the input signals
(5 input signals).
29
Changes the functions assigned to the output signals
(2 output signals).
Initial display at power ON
Changes the display item when turning on the power.
28
Data initialization
Restores the operation data to the factory setting (initial value).
31
Restores the parameter setting to the factory setting (initial value).
28

Oriental motor BMU Series Specifications

General

Brand	Oriental motor
Model	BMU Series
Category	Engine
Language	English