Regulations and standards
−41−
13 Regulations and standards
13.1 UL Standards, CSA Standards
This product is recognized by UL under the UL and CSA Standards.
13.2 CE Marking/UKCA Marking
This product is axed with the marks under the following directives/regulations.
EU Low Voltage Directive/UK Electrical Equipment (Safety) Regulation
Installation conditions
Overvoltage category
Ⅱ
Pollution degree 2
Degree of protection IP20
Protection against electric shock Class
Ⅰ
equipment
z
This product cannot be used in IT power distribution systems.
z
Isolate the cable for connecting between the motor and the driver, the power supply cable and other drive
cables from the signal cables (CN4) by means of double insulation.
z
Use a circuit breaker conforming to EN or IEC Standards.
z
The driver is not provided with the motor overtemperature protection specied in EN Standards.
z
The driver is provided with the electronic motor overload protection specied in EN Standards.
Overload protection characteristics
200
100
Overload protection
activation line
Operating time
T = Overload protection activation operating time 0.1 to 60.0 s
The driver is provided with the electronic motor overload protection, but is not provided with the thermal
memory retention function and the speed sensitive function.
To Next Page
Loading...
Need help?
General
