Oriental motor BMU Series User Manual

Connection
−11−
6 Connection
6.1 Connecting the motor and driver
There are the connector type motor and the cable type motor.

Connector type
Connect the motor and driver using the connection cable (sold separately). The connection cables are provided up to
10 m (32.8 ft.). For about the connection methods of the motor and connection cable, refer to the operating manual of
the motor.
CN1
Pr
otective Earth Terminal
Be sure to ground.
Grounding
CN2
CN3
Connection cable
(sold separately)
Connect the motor connector (white) of the connection cable to the CN2, and the sensor connector (black) to the CN3 on
the driver.
z
Extension between motor and driver
Use a connection cable (accessory) for relay when extending the wiring distance between the motor and driver.
The connection cable for relay can be used by connecting up to 2 pieces. The wiring distance between the motor and
driver can be extended to a maximum of 10.5 m (34.4 ft.).
Refer to p.40 for the connection cable for relay.
Example of use: Example of extension by adding two connection cables [10.5 m (34.4 ft.)]
Grounding
Grounding
Connection cable
CC005HBLB
Flexible connection cable
CC07BL2R
Connection cable
CC03BL2
Be sure to insulate the
terminal not in use.
Connecting for relay
10.5 m (34.4 ft.)
0.5 m (1.6 ft.) 7 m (23.0 ft.)
3 m (9.8 ft.)
Be sure to ground
.
Be sure to ground.
Note
•
Secure each connectors part not to apply stress on the connectors part. If not secured, the cables may
damage by the stress.
•
Securely insert the connector straight. Insecure connections may cause
malfunction or damage to the motor or driver.
To power supply
⇒
p.14

Oriental motor BMU Series Specifications

General

Brand	Oriental motor
Model	BMU Series
Category	Engine
Language	English