Panasonic KX-NS500 User Manual

Join After Time Out
Extensions or
outside telephones can join the multiple party conversation that has been already started using
this feature. For example, if the conference group members fail to answer when a conference group call is
made, they can join the multiple party conversation later using this feature. They can join the conversation from
outside telephones (through DISA or TIE Line) or extensions. This feature is available for both modes:
Conference Mode and Broadcast Mode.
For security reasons, you can set a specific entry code for the conference group call. To join the conversation,
extensions/outside telephones have to enter the same entry code. Therefore, you have to inform the parties
to be added to the conversation of the entry code in advance.
For an extension originating the conversation
To make a conference group call with an entry code
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
Talk.
Dial conference
group number (1 digit).
Enter 32.
conference
group no.
3 2
C.Tone
Enter entry code
(max. 8 digits).
Enter #.
entry code
*
Wait for an
answer.
140 User Manual
1.7.3 Making a Conference Group Call

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm