Panasonic KX-NS500 User Manual

1.4.2 Holding a Call
–
Holding
– Holding in a System Parking Zone (Call Park)
• For users of non-KX-UT series SIP phones:
The holding operation for SIP extension users may differ from the steps in this section, and
may vary depending on the type of telephone being used.
Holding
There are two types of hold. The difference between them is that other people can retrieve your held call
(Regular Hold) or not (Exclusive Call Hold). As they can be alternated, ask your manager what the current
mode is.
To hold
(Call Hold)
On-hook.
During a conversation
PT/PS
Press HOLD, or press TRANSFER and
then enter 50.
C.Tone
OR
05
C.Tone
SLT
During a conversation
On-hook.
Enter 50.
Press Recall/
hookswitch.
05
C.Tone
SIP Extn./S-PS
During a conversation
On-hook.
HOLD
Press HOLD.
OR
User Manual 73
1.4.2 Holding a Call

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm