Panasonic KX-NS500 User Manual

To select the No DTMF Input operation
PT/SLT/PS/SIP Extn./S-PS
Enter 461.
On-hook.
Log in to your mailbox.
6 14
Message recording.
Disconnect the caller.
Disconnect the caller when call was received after hours
(message recording for all other times).
1
2
Enter the desired option.
Enter 2
to accept.
2
Enter 1.
1
3
Enter 1 to select
the No DTMF Input Operation.
1
To confirm the settings for your personal custom service
PT/SLT/PS/SIP Extn./S-PS
Enter 46.
On-hook.
Log in to your mailbox.
64
Enter 2
to review.
2
• The System Administrator or the System Manager must enable Transfer to Outside for your
mailbox before it can be used.
• The
Transfer to Outside option can be used a maximum of 4 times in your Personal Custom
Service.
• If you are using a PRI line, you may need to enter # at the end of outside telephone numbers.
For more information, consult your System Administrator.
Setting the Alarm (Timed Reminder)
You can receive an alarm at your telephone to remind you of a meeting, appointment or as a wake-up call.
The
alarm can occur either once or daily (every day until cancelled) at a preset time. When you go off-hook to
answer, you will hear a special dial tone or prerecorded message.
User Manual 191
1.8.6 Other Features

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm