Panasonic KX-NS500 User Manual

Transferring to an Extension in the PBX
To transfer
Press DSS or dial
extension number.
On-hook.Talk.
During a conversation
This step can be omitted.
PT/PS
Press
TRANSFER.
extension no.
OR
(DSS)
C.Tone
Dial
extension number.
On-hook.
Talk.
During a conversation
SLT
Press Recall/
hookswitch.
extension no.
OR
C.Tone
This step can be omitted.
Dial extension number. On-hook.Talk.
During a conversation
SIP Extn./S-PS
extension no.
KX-UT series and S-PS:
Press TRANSFER.
Other than KX-UT series and S-PS:
Press HOLD.
*
C.Tone
This step can be omitted
(KX-UT series and S-PS only).
HOLD
OR
XFER
KX-UT series
and S-PS only.
• * For SIP phone users, instead of going on-hook, if you press the TRANSFER button
(KX-UT series [except
KX-UT670]), Transfer Cancel button (KX-UT670) once, or the HOLD
button (non-KX-UT series) once or twice (depending on the telephone being used), you can
return to the held call. The call with the transferred party will be disconnected.
• For all types of telephone users, if the call is not transferred within a specified time, you will
hear an alarm (Transfer Recall).
User Manual 67
1.4.1 Transferring a Call (Call Transfer)

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm