Panasonic KX-NS500 User Manual

KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS
During a conversation
Press the flashing DN
or S-CO.
Talk to the
other party.
Talk to the
original party.
Dial the other
party's extension
number.
Press HOLD.
extension no.
C.Tone
The other party will be on hold.
OR
(S-CO)
(DN)
Press HOLD.
This step can be omitted if Automatic
Call Hold is enabled on your telephone.
To leave the conversation and then let the two parties talk
PT/PS
Press DSS or dial the other
party's extension number.
Talk to the
other party.
During a conversation
Press TRANSFER.
extension no.
OR
(DSS)
Press TRANSFER.
C.Tone
On-hook.
SLT
Dial the other party's
extension number.
Talk to the
other party.
During a conversation
Press Recall/
hookswitch.
extension no.
OR
C.Tone
On-hook.
Press Recall/
hookswitch.
OR
80 User Manual
1.4.3 Talking to Two Parties Alternately (Call Splitting)

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm