Panasonic KX-TDA100 User Manual

3.1 Personal Programming
User Manual 137
3.1.3 Customizing the Buttons
You can change the flexible CO buttons/DSS buttons, and programmable feature (PF) buttons on PTs, DSS
Consoles, Add-on Key Modules, and PSs to the following function buttons. For example, if your telephone
has more CO buttons than available CO lines, you may change unused CO buttons to one-touch buttons.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Buttons
Programmable
Button
Programming Input
CO DSS PF
Loop-CO (L-CO)
Group-CO (G-CO)
+ CO line group no. (2 digits)
Single-CO (S-CO)
+ CO line no. (3 digits)
Direct Station Selection (DSS)
+ Extension no.
One-touch Dialing*
1
+ Desired no. (max. 32 digits)
Group Directory Number (G-
DN)
+ Incoming call distribution group
extension no.
Message
Message for another extension
+ Extension no./Incoming call distribution
group extension no.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Press PROGRAM
or PAUSE .
Press
PROGRAM
or PAUSE .
Press
CO ,
DSS or PF .
To exit
To program
To enter the program mode
Follow
programming
input
.
To continue
(CO, DSS, PF)
programming
input
OR
PROGRAM
PAUSE
OR
PROGRAM
PAUSE
Press ENTER
or STORE .
OR
AUTO DIAL
STORE
#
0
1
2
*
²
3 0
4 0
4 0
4 1
4 2
4 3

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards