Panasonic KX-TDA100 User Manual

1.2 Making Calls
38 User Manual
1.2.5 Alternate Calling—Ring/Voice
To change the method
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting
method, either ring or voice, when receiving an intercom call.
Ringing (Default): You can call the other party with a
ring tone.
Voice-Calling: You can talk to the other party
immediately after confirmation tone.
• If the called party uses a single line telephone or portable station, Voice-Calling is not
available.
• This feature is not available when the called party's telephone is in the Voice Call Deny mode.
Customizing Your Phone
• 3.1.2 Settings on the Programming Mode—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party's voice.
Ring
Ring
Hello
OR
After dialing
Enter .
PT/SLT/PS
Talk.
C.Tone

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards