Panasonic KX-TDA100 User Manual

1.4 During a Conversation
User Manual 49
1.4 During a Conversation
1.4.1 Call Transfer
– Transferring to an Extension on the PBX
– Transferring to an Outside Party Using the PBX Service
Transferring to an Extension on the PBX
To transfer
• You can transfer a held call without talking by going on-hook.
If a call is not retrieved within a specified time, you will hear an alarm as a reminder. And, if
an outside call is not answered within a specified time, it is automatically disconnected.
• If you hear an alarm tone, the destination extension did not answer the call. Answer the call.
Press DSS or dial
extension number .
On-hook.
Talk.
During a conversation
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
PT/PS
Press TRANSFER .
extension no.
OR
(DSS)
TRANSFER
C.Tone
Dial extension
number
.
On-hook.
Talk.
During a conversation
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
SLT
Press Recall/
hookswitch .
extension no.
C.Tone

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards