Panasonic KX-TDA100 User Manual

1.8 Call Center
User Manual 87
1.8 Call Center
1.8.1 Log-in/Log-out, Wrap-up
To set Log-in/Log-out
You can control your status in an incoming call distribution
group. When in the Log-out mode, incoming calls to the
group will not ring at your extension. When you return, calls
will again ring at your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive calls after completing a previous call. This time can
be used for you to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave a distribution group.
Log-in
Log-out
Wrap-up
Talk.
Not Ready
Ready
Off-hook.
On-hook.
PT/SLT/PS
Enter 736 .
Log-out
Log-in
0
1
OR
Enter ICD Group
extension number
or .
Specified
OR
ICD Group
extension no.
All
3 67
Enter 0 or 1 .
C.Tone
ICD Group: Incoming Call Distribution Group

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards