Panasonic KX-TDA100 User Manual

1.4 During a Conversation
56 User Manual
1.4.4 Call Waiting
– Answering Call Waiting in the PBX
– Answering Call Waiting from the Telephone Company
Answering Call Waiting in the PBX
During a conversation, a call waiting tone or voice announcement through the speaker or the handset occurs
when an outside call has been received or another extension is letting you know a call is waiting. You must
activate this feature to use it. (Default: Enable—Tone)
You can answer the second call by disconnecting (1) or holding (2) the current call.
1. To disconnect the current call and then talk to the new party
SLT
Dial the other party's
extension number
.
Talk to the
other party.
During a conversation
Press Recall/
hookswitch
.
extension no.
OR
C.Tone
On-hook.
Press Recall/
hookswitch
.
OR
PT/SLT/PS
While hearing a tone
Off-hook.
On-hook.
Talk to the
new party.

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards