Panasonic KX-TDA100 User Manual

1.7 Extension Settings
User Manual 85
1.7.10 Paralleled Telephone
1.7.11 Wireless XDP Parallel Mode
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
To cancel
A digital proprietary telephone extension user can choose whether the single line
telephone connected in parallel will ring or not, when an incoming call is received.
(Default: Ring)
• Even if "No ring" is selected, calls can be made and answered on the single line telephone
by lifting the handset.
• If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
Off-hook.
On-hook.
DPT
Enter 1 to ring
or
0 not to ring.
Ring
No ring
1
0
OR
Enter 39 .
3 9
C.Tone
PS
Enter extension number
of the paired telephone.
Press
CANCEL .
PS
extension no.
Press TALK . Enter 48 .
4 8 1
C.Tone
Enter 1 .
PS PS
Press CANCEL .
Press
TALK .
Enter
48 .
4 8 0
C.Tone
Enter 0 .

Panasonic KX-TDA100 Specifications

General

System Capacity	Up to 128 extensions
VoIP Support	Yes, with optional cards
Digital Extensions	Yes
Analog Extensions	Yes
ISDN Support	Yes
Power Supply	AC 100-240 V, 50/60 Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Networking	Yes
Type	Hybrid IP PBX
Wireless Capability	Yes
Supported Extensions	Digital, Analog
Trunk Interfaces	Analog, ISDN
Voicemail Capacity	Optional, via voice processing cards