4. Focus, Brightness (Exposure) and Colour tone Settings
102
Applicable modes:
When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the
position and size of the AF area.
•
Perform the operation after cancelling the touch shutter function.
• You can also display the AF area setting screen by touching the recording screen. (When
[Touch AF] of [Touch Settings] in the [Custom] menu is set to [AF])
• The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P194) is set to [ ].
Not available in these cases:
•
When using digital zoom, the position and size of the AF area cannot be changed.
Position and size of the AF area can be changed.
1 Press 2 ().
2 Select [š] or [Ø] and press 4.
•
AF area setting screen is displayed.
3 Change the position and size of the AF area.
4 Press [MENU/SET] to set.
•
AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [ ] is touched.
Setting up position of the AF area/changing size of the AF area
When selecting [š], [Ø]
Button
operation
Touch
operation
Description of operation
3/4/2/1 Touching Moves the AF area.
Pinching out/in Enlarges/reduces the AF area in small steps.
s Enlarges/reduces the AF area in large steps.
[DISP.] [Reset]
Resets the AF area back to the centre.
• If you press the button again, the frame size will
be reset to the default setting.
To Next Page
Loading...
Need help?
General
