105
4. Focus, Brightness (Exposure) and Colour tone Settings
Applicable modes:
You can optimise the focus and brightness for the position you have touched.
1
Select the menu. (P54)
2
Touch the subject you want to optimise the
brightness for.
• AF area setting screen is displayed. (P102)
• The brightness optimisation position is displayed on the
centre of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [ ], which is used exclusively for the Touch AE.
• Touching [Reset] returns the brightness optimisation position and the AF area to the
centre.
3
Touch [Set].
• The AF area with the same function as [
Ø
] is displayed on the touched position.
• Touching [ ] ([ ] when [
Ø
] is selected) will cancel the [AF+AE] setting.
• When recording with the Touch Shutter, the focus and brightness are optimised for the touched
position before recording takes place.
• At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Not available in these cases:
•
[AF+AE], which optimises the focus and brightness, does not work in the following cases.
– When using the Digital Zoom
– When the AF area has been set by using the cursor button
– When [4K Live Cropping] is set
Optimising the focus and brightness for a touched position
> [Custom] > [Touch Settings] > [Touch AF] > [AF+AE]
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
MENU
5HVHW
ュリヴヱハ
6HW
To Next Page
Loading...
Need help?
General
