217
9. Using Menu Functions
[Monochrome Live
View]
You can display the recording screen in black and white.
This function is convenient when a black and white screen
will make it easier to set focus with Manual Focus.
• Even if you use the HDMI output during recording, this
function will not work for the connected device.
• Recorded images will not be affected.
s
[Constant Preview]
You can check the effects of the chosen aperture and
shutter speed on the recording screen in Manual Exposure
Mode.
• This function does not work when using the flash. Close
the flash.
s
[Expo.Meter]
Set whether or not to
display the exposure meter.
A Exposure meter
• Set to [ON] to display the Exposure meter when
performing Programme Shift, setting aperture, and setting
shutter speed.
• Unsuitable areas of the range are displayed in red.
• When the Exposure meter is not displayed, switch the
display information for screen by pressing [DISP.].
• If no operations are performed for approximately
4 seconds, the Exposure meter disappears.
s
[Dial Guide]
Set whether or not to
display the dial operation
guide.
s
[LVF Disp.Style] This will set the display style of the viewfinder. P48
[Monitor Disp. Style] This will set the display style of the monitor. P49
[Monitor Info. Disp.] Display the recording information screen. (P49) s
> [Custom]
MENU
60
604.0
4.0
2
00
SS
SS
F
0
98
98
250 15
4.0 5.6 8.0
3060125
To Next Page
Loading...
Need help?
General
