2. Getting Started/Basic Operations
58
Assigning frequently used functions to the
buttons
(function buttons)
You can assign recording functions, etc. to specific buttons and icons.
•
Some functions cannot be assigned depending on the function button.
1 Select the menu. (P54)
2 Press 3/4 to select the function button you want to
assign a function to and then press [MENU/SET].
3 Press 3/4 to select the function you want to assign
and then press [MENU/SET].
•
For details on the functions that can be assigned in [Setting
in REC mode], refer to P59.
• For details on the functions that can be assigned in [Setting
in PLAY mode], refer to P60.
• To restore the default function button settings, select [Restore to Default].
∫ Configuring the function button settings from the on-monitor recording
information screen
Touching [Fn] on the on-monitor recording information screen (P48) also allows you to
display the screen in step
2.
∫ Rapidly assigning functions
The assignment screen displayed in Step
3 above can be displayed by holding a function
button ([Fn1] to [Fn4]) for 2 seconds.
Recording mode:
The function assignment screen for [Setting in REC mode] is displayed
Playback mode:
The function assignment screen for [Setting in PLAY mode] is displayed
•
In some cases the function assignment screen cannot be displayed depending on the mode or
display screen.
> [Custom] > [Fn Button Set]>
[Setting in REC mode]/[Setting in PLAY mode]
To Next Page
Loading...
Need help?
General
