4. Focus, Brightness (Exposure) and Colour tone Settings
106
Adjusting Focus Manually
Applicable modes:
Use this function when you want to fix the focus or when the distance between the lens
and the subject is determined and you do not want to activate Auto Focus.
1
Select the menu. (P54)
2
Press 2 ().
3
Press 3/4/2/1 to adjust the focus position, and press [MENU/SET].
• The assist screen is displayed, enlarging the area. (MF
Assist)
• You can also enlarge the area by rotating the focus ring,
moving the focus lever, or pinching out (P51) the screen
or touching the screen twice.
• You can also adjust the focus position by dragging (P51)
the screen.
• Pressing [DISP.] resets the focus position back to the centre.
4
Adjust the focus.
> [Rec] > [Focus Mode]> [MF]
The operations used to focus manually differ depending on the lens.
When using an interchangeable lens (H-FS12032) with no focus ring
Press 1: Focuses on nearby subject
Press 2: Focuses on distant subjects
A Slide bar
• These operations are possible only on the focus
adjustment screen.
• Pressing and holding 2/1 will increase the
focus speed.
• Focus can also be adjusted by dragging the slide bar.
MENU
リヴヰ
ョㄏピ
To Next Page
Loading...
Need help?
General
