5. 4K Photo and Drive Settings
126
Selecting pictures from 4K burst file and saving
This section describes how to select pictures from a 4K burst file and save them.
For information on how to record 4K burst files, refer to P118.
•
The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
1 Select a 4K burst file on the playback screen, and
press 3.
•
4K burst files are displayed with [ ].
• You can also perform the same operation by touching the
icon [ ].
• The slide view screen for selecting pictures will be
displayed.
2 Drag the frames to select the frame you want to save
as a picture.
•
You can also perform the same operation by pressing
2
/
1
.
3 Press [MENU/SET] to save the picture.
<Slide view screen>
Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play
back only 4K burst files and pictures created from them.
4K burst files recorded with [ ] ([4K Burst]) or [ ] ([4K Burst(S/S)])
When you select pictures from any 4K burst file
with long burst time, we recommend that you
make a rough selection of scenes using the 4K
burst playback screen, and then select the desired
frame which you want to save as a picture by
using the slide view screen.
•
For details on how to operate, refer to P126, P128.
Fn1
Fn3
Position of the displayed
frame
To Next Page
Loading...
Need help?
General
