249
9. Using Menu Functions
You can set protection for pictures you do not want to delete by mistake.
> [Playback] > [Protect]
Select the picture. (P229)
∫ Cancelling all the [Protect] settings
Press 3/4 to select [Cancel], and then press [MENU/SET].
•
The [Protect] feature is only designed to work with this camera.
• Even if you protect pictures on a card, they will be deleted if the card is formatted.
You can clear and replace all information relating to face recognition in selected images.
> [Playback] > [Face Rec Edit]
1 Press 3/4 to select [REPLACE] or [DELETE], and then press [MENU/SET].
2 Press 2/1 to select the picture and then press [MENU/SET].
3 Press 2/1 to select the person and then press [MENU/SET].
4 (When [REPLACE] is selected)
Press 3/4/2/1 to select the person to replace and then press [MENU/SET].
•
Cleared information regarding the [Face Recog.] cannot be restored.
• When all Face Recognition information in a picture has been cancelled, the picture will not be
categorised using Face Recognition in [Category Play].
• The Face Recognition information of pictures in a group has to be edited at once.
(You cannot edit one picture at a time.)
• Editing of group pictures can be performed only on the first picture of each set.
[Protect]
Even if you do not protect pictures on a card, they cannot be deleted when the
card’s Write-Protect switch is set to [LOCK].
[Face Rec Edit]
MENU
MENU
To Next Page
Loading...
Need help?
General
