10. Using the Wi-Fi function
266
A picture can be automatically sent to a specified device every time you take it.
•
When connected with [Send Images While Recording], [ ] is
displayed on the recording screen, and [ ] is displayed while
sending a file.
• To terminate the connection, follow the steps below:
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes]
• You can terminate the connection or change the send settings
by pressing [Wi-Fi]. (P253)
You cannot change the settings while sending pictures. Wait until sending is complete.
• Since the camera gives priority to recording, sending may take longer during the recording.
• If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will
not be resent.
• You may not be able to delete files or use the playback menu while sending.
Not available in these cases:
•
You cannot send motion pictures, 4K burst files recorded with the 4K Photo function, and
pictures recorded in [Post Focus].
Send Images While Recording
To Next Page
Loading...
Need help?
General
