Digiplex/DigiplexNE LCD Keypad 11n
4.4 Display Entry De la y Time r
SECTION [003]: O PT ION [3]
Based on the user's needs, an Entry Delay Timer will be
programmed to provide the user time to enter their User Access
Code before the alarm is triggered. The Entry Delay Timer's
countdown can be displayed on the LCD screen.
4.5 Confidential Mode
SECTION [003]: O PT IONS [4] AND [5]
If the Confidential Mode is enabled and no actions are performed
on the keypad for a period of tim e, the LCD screen will appear as
shown in Figure 4.1 (page 12) and the “AC” and “STATUS” LED
will be off until either a button is pressed or an access code is
entered. The period of time in which no action is performed is
defined by the Confidential Mode Timer (005-255 seconds; refer
to section section 4.6 on page 12 on page 12). Confidential
Mode is activated by enabling option [4 ] . Option [5] regulates
whether the LCD screen will be activated at the touch of a button
or only when an access code is entered.
On ce t h e LCD scr e e n is act ivate d ( by cod e or bu tt on ), No rm al
Option [2] OFF= Will not display Exit Delay timer (default).
Option [2] ON= LCD screen will display Exit Delay tim er.
Option [3] OFF= Will not display the Entry Delay Timer
(default).
Option [3] ON= LCD screen will display Entry Delay Timer.
To Next Page
Loading...
Need help?
General
