USER MANUAL
Peplink Balance Series
http://www.peplink.com - 28 - Copyright © 2010 Peplink
7 Basic Configuration
7.1 Connecting to Web Admin Interface
1. Start a web browser on a computer that is connected with Peplink Balance through LAN.
2. To connect to Web Admin Interface of Peplink Balance, enter the following LAN IP address in the
address field of the web browser:
http://192.168.1.1
(This is the default LAN IP address of Peplink Balance.)
3. Enter the following to access the Web Admin
Interface.
User Name: admin
Password: admin
(This is the default Admin User login of Peplink
Balance. The Admin and Read-only User
Password can be changed at System > Admin
Security of the Web Admin Interface.)
4. After successful login, the Dashboard of Web Admin Interface will be displayed. It looks similar
to the following:
Important Note
Configuration changes (e.g. WAN, LAN, Admin settings, etc.) take effect after clicking the Save
button on each page’s header. The Apply Changes button causes the changes to be saved
and applied.
To Next Page
Loading...
Need help?
General
