2023-05
12
VisuNet RM Shell 6
VisuNet RM Shell—An Overview
3.2 Factory Reset
For the devices with 64 GB of memory, the image is already installed on the local disk. This can
definitely be determined by the factory reset version.
With Factory Reset Version 6.2 and newer, the image file is no longer available locally on Parti-
tion D which increases the storage and speed. With Factory Reset Version >6.0 and VisuNet
RM Shell version >6.2 it is possible to capture your own backup image.
Process explorer Allows you to diagnose an RM and
monitor how much RAM, storage,
and CPU are being used by local
processes.
Desktop Sharing
Server
Clone an RM and display its desktop
on other RMs
Feature Description Notes
Note
We strongly recommend creating your own backup image and store it on your network drive.
Feature Description Notes
Pepperl+Fuchs
Factory Reset
Image
Available for each-specific device.
The Pepperl+Fuchs default settings
are applied back to your device. With
Factory Reset 6.0 and newer the
image file will not be stored on the
device anymore.
Get in contact with your local sales
support
Caution! After applying the Pep-
perl+Fuchs image, the setup of the
device must be performed locally!
The VisuNet RM Shell first start wiz-
ard guides you through the most
important initial configuration steps.
Refer to the First Start Wizard Chap-
ter in the VisuNet RM Shell manual
for further information.
Backup Image Own captured Backup Image, which
can only be applied on the same
device with the identical serial num-
ber. The backup image can be used
to restore a specific state of a device.
Has to be captured by the customer
in the VisuNet RM Shell Factory
Reset or via
VisuNet CC - Device Backup in
advance.
Note: VisuNet CC might not be able
to find the device when changes of
the computer name or the Network
settings have been done after cap-
turing the image file.
To Next Page
Loading...
Need help?
General
