197
6
Driving
Operating fault
In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.
Before doing anything to the system,
the pressures of the four tyres must be
checked and the system reinitialised.
The flashing and then fixed illumination of the
under-inflation warning lamp accompanied
by illumination of the Service warning lamp
indicates a fault with the system.
A message appears, accompanied by an
audible signal.
Memorising speeds
Linked to the speed limiter/programmable
cruise control, this function allows speed
settings to be registered which will then be
offered as settings for two systems: the speed
limiter (a maximum speed) and the cruise
control (cruising speed).
You can memorise up to 5 speed limits in the
system.
By default, some speed settings are already
memorised.
As a safety measure, the driver must
only modify the speed settings when
stationary.
Memorising speeds
F Select the "Driving functions" tab.
F Select the "Adjusting Speeds" function.
This function can be activated or
deactivated in the Vehicle / Driving
menu of the touch screen.
F Press "ON" to activate the function.
F Select the speed setting 1 to 5 that you want
to change.
F Select the speed setting you want to
change.
F Enter the new value using the numeric
keyboard and confirm.
F By default, some speed settings are already
memorised.
To Next Page
Loading...
Need help?
General
