3
85
Ease of use and comfort
Second row seats
Rear head restraints
The rear head restraints can be removed.
To remove a head restraint:
F pull the head restraint as far up as it will go,
F press the lug A to release the head restraint
and remove it completely,
F stow the head restraint.
To refit a head restraint:
F insert the head restraint rods into the guides
in the corresponding seat backrest,
F push the head restraint down as far as it will
go,
F press the lug A to free the head restraint
and push it down.
Never drive with passengers seated at
the rear when the head restraints are
removed; they must be in place and in the
high position.
Seat adjustments
They have two positions:
- a high position, for when the seat is in use:
F pull the head restraint fully up.
- a low position, for stowing, when the seat
is not in use:
F press the lug A to release the head
restraint and push it fully down.
The three 2nd row seats are independent and
of the same width. Their backrests can be
folded to alter the boot loading space.
A. Longitudinal adjustment
B. Adjusting the seat backrest angle and
folding
C. Folding the backrest from behind and
emergency exit for 3rd row passengers
D. Access to 3rd row seats (7-seat versions)
To Next Page
Loading...
Need help?
General
