270
In the event of a breakdown
Composition of the kit
1. 12 V compressor, with integral pressure
gauge.
2. Sealant cartridge, with integral hose.
3. Speed limit sticker.
The speed limit sticker must be secured
to the interior of the vehicle in the driver's
field of vision, to remind you that a wheel
is in temporary use.
Do not exceed a speed of 50 mph
(80 km/h) when driving with a tyre repaired
using this type of kit.
Repair procedure
F Switch off the ignition.
F Secure the speed limit sticker inside the
vehicle.
F Uncoil the pipe stowed under the
compressor.
F Remove the valve cap from the tyre to be
repaired, and place it in a clean area.
F Connect the pipe from the compressor to
the bottle of sealant.
Avoid removing any foreign bodies which
have penetrated into the tyre.
F Turn the sealant bottle and secure it in the
cut-out provided on the compressor.
F Connect the hose from the bottle of sealant
to the valve of the tyre to be repaired and
tighten firmly.
To Next Page
Loading...
Need help?
General
