76
Ease of use and comfort
Front seats
Manual seats
1. Adjusting the seat forwards and backwards
F Raise the control bar and slide the seat
forwards or backwards.
F Release the bar to lock the seat in position
in the runners.
2. Adjusting the seat height
F Raise or lower the control as many times as
needed to obtain the desired seat height.
3. Adjusting the seat backrest angle
F Turn the knob forwards or backwards to
recline the backrest to the desired angle.
or
F For a passenger seat that can be placed in
the table position, pull the handle and guide
the backrest forwards or backwards.
4. Adjusting the height of the head restraint
Refer to the corresponding section.
5. Adjusting the lumbar support
(only on the driver's seat)
F Turn the knob forwards or backwards to
increase or decrease the level of lumbar
support.
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat.
There is a risk of trapping or pinching passengers if present in the rear seats or jamming the
seat if large objects are placed on the floor behind the seat.
To Next Page
Loading...
Need help?
General
