PIAGGIO MP3 300 User Manual

Contact an Authorised Service Centre and bring the «A» MASTER key and all
«B» starter keys that you own.
The codes of starter keys not submitted for the new programming procedure are de-
leted from the memory. Any lost starter keys will therefore not be enabled to start the
engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
SHOULD THE VEHICLE CHANGE OWNER, IT IS ABSOLUTELY NECESSARY
THAT THE NEW OWNER GET POSSESSION OF THE KEY WITH THE MASTER
GRIP (AS WELL AS ALL OTHER IGNITION KEYS).
Programming the immobilizer system (01_22)
Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
IZER system and/or for storing other key codes. The programming procedure should
be carried out with the engine stop switch set to «RUN».
START PROCEDURE
Insert the «MASTER» key «A» into the ignition switch (in «OFF») and turn it to
«ON». After 1 - 3 seconds, turn the key to «OFF » again and pull it out.
INTERMEDIATE STAGE
21
1 Vehicle

PIAGGIO MP3 300 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	278 cc
Fuel System	Electronic fuel injection
Transmission	Automatic CVT
Rear Brake	240 mm disc
Seat Height	780 mm
Dry Weight	225 kg
Cooling System	Liquid-cooled
Front Suspension	Articulated quadrilateral
Front Brake	Two 258 mm discs
Fuel Tank Capacity	11 liters
Front Tire	110/70-13
Rear Tire	140/60-14
Rear Suspension	Dual hydraulic shock absorbers