03_04
03_05
03_06
Engine oil change (03_04, 03_05, 03_06)
Have oil changed and the cartridge filter «C» replaced as indicated in the scheduled
maintenance table at an Authorised Service Centre. The engine should be emptied
by draining the oil through drainage plug «B » of the mesh filter on the flywheel side.
In order to facilitate the oil drainage, loosen the cap/dipstick. Since a certain quantity
of oil still remains in the circuit, add approx. 950 ÷ 1000 cm³ of oil through the cap
«A. Then start the engine, leave it running for a few minutes and shut it off: after 5
minutes, check the level and if necessary, top-up without exceeding the MAX lev-
el. The cartridge filter must be replaced at every oil change. For top-ups and changes,
use new oil of the recommended type.
WARNING
RUNNING THE ENGINE WITH INSUFFICIENT LUBRICATION OR WITH INADE-
QUATE LUBRICANTS ACCELERATES THE WEAR AND TEAR OF THE MOVING
PARTS AND CAN CAUSE IRREVERSIBLE DAMAGE.
WARNING
EXCESSIVE OIL LEVEL TOP-UPS CAN LEAD TO INCRUSTATIONS AND VEHI-
CLE MALFUNCTIONING.
CAUTION
USED OILS CONTAIN SUBSTANCES HARMFUL TO THE ENVIRONMENT. FOR
OIL REPLACEMENT, CONTACT AN AUTHORISED SERVICE CENTRE, WHICH
IS EQUIPPED TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY FRIEND-
LY AND LEGAL WAY.
48
To Next Page
Loading...
Need help?
General
