Voice recognition
(Function of AVH-P4300DVD)
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
1 Start voice recognition.
Refer to Introduction of Bluetooth telephone op-
erations on page 32.
2 Say the name of your contact aloud.
Connecting a Bluetooth
audio player
(Function of AVH-P4300DVD)
A Bluetooth wireless connection can be estab-
lished by putting the unit into initiating a con-
nection mode.
% Put the unit in initiating a connection
mode.
Refer to Bluetooth audio operations on page
33.
This unit is now on standby for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Connecting to a Bluetooth
device automatically
(Function of AVH-P4300DVD)
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1 Touch Auto Connect to turn automatic
connection on.
Refer to Introduction of Bluetooth telephone op-
erations on page 32.
If your Bluetooth device is ready for a Blue-
tooth wireless connection, a connection to
this unit will automatically be established.
# To turn automatic connection off, touch
Auto Connect again.
2 Turn your vehicle’s ACC switch off and
on.
Displaying Bluetooth
Device address
(Function of AVH-P4300DVD)
This unit displays its Bluetooth Device ad-
dress.
% Touch Device Information to display de-
vice information.
Refer to Introduction of Bluetooth telephone op-
erations on page 32.
The Bluetooth Device address is displayed.
<QRB3126-A/N>55
En
55
Section
14
Detailed instructions
Detailed instructions
To Next Page
Loading...
Need help?
General
