Pioneer AVH-P4400BH User Manual

Section
IDC~M __ e_n_u_o_p_e_r-at_i_o_n_s _______________________________ )
Changing the pidure adjustment
You can adjust the Brightness (brightness),
Contrast (contrast), Color (color) , Hue (hue),
Dimmer (dimmer), Temperature (tempera-
ture),
Black Level (black level) and
Dot Adjustment (RGB dot clock adjustment)
for each source and rear view camera.
•
You cannot adjust Color, Hue, Contrast
and Black Level for the audio source.
1 Display the system menu.
Refer to Introduction of menu operations on
page
57.
2 If you are adjusting the
Picture Adjustment, select the unit.
Rear
View
!source!
Adjusting the Picture Adjustment
for the Navigation system.
Adjusting the
Picture Adjustment
for the rear view camera.
Adjusting the
Picture Adjustment
for the source.
3 Touch any of the following touch panel
keys to select the function to be adjusted.
Picture Adjustment items are displayed.
• Brightness-Adjusts the black intensity
• Contrast- Adjusts the contrast
• Color- Adjusts the color saturation
• Hue- Adjusts the tone of color (red or
green
is emphasized)
• Dimmer- Adjusts the brightness of the dis-
play
• Temperature- Adjusts the color tempera-
ture, resulting
in a better white balance
• Black Level- Emphasizes the dark portions
of images making the difference between
bright and dark more distinct
• Dot Adjustment- Adjusts phase shifting
by dot clock when a Navigation system is
connected
@ En
• You cannot adjust the picture adjustment for
the rear view camera when
Camera Polarity is
set to Off. (Refer to Setting the rear view camera
(back up camera) on the previous page.)
•
You can adjust Hue only when the color sys-
tem is set to NTSC.
• With some rear view cameras, picture adjust-
ment may not
be possible.
4 Touch "'iiii or ..,.. to adjust the selected
item.
Each time you touch "'iiii or..,.., the level of the
selected item increases or decreases.
• Dimmer can be adjusted from +1 to +48.
• Temperature
can be adjusted from +3 to -3.
5 Touch Black Level and Dot Adjustment
to
adjust.
• Black Level can be set on or off.
• Dot Adjustment can be set to 1 or 2.
Notes
• You cannot operate this function while driving.
• Different
Brightness/Contrast/Dimmer set-
tings can
be set for when the illumination
switch
is on and when it is off.
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the
car's interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
•
To perform this function, dedicated micro-
phone (e.g. CD-MC20) is required.
A wARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto
TA
or auto EO while driving.
A cAUTION
• Thoroughly check the conditions before per-
forming auto EO as the speakers may be da-
maged if these functions are performed when:

Pioneer AVH-P4400BH Specifications

General

Brand	Pioneer
Model	AVH-P4400BH
Category	Car Receiver
Language	English