RUB RAIL
INSERT
FOOTWELL PADS
GRAB HANDLE
SPONSON
TOW HOOK
HULL ASSEMBL Y NOTES
Rub Rail Fastener Torque: 25 in.lbs. (2.8 Nm)
Rub Rail Insert Fastener Torque: 25 in.lbs. (2.8 Nm)
Bumper Fastener Torque: 25 in.lbs. (2.8 Nm)
Grab Handle Bolt Torque: 10 ft.lbs. (4 Nm)
Seat Post Plunger Nut Torque: 18 ft.lbs. (25 Nm) .
Sponson Fastener Torque: 70 in.lbs. (6 Nm) Apply marine grade silicone to holes.
SEAT POST
SEAT POST AND TOW HOOK
MAY BE ONE--PIECE DESIGN
HULL AND BODY
7.52004 Four Stroke PWC Service Manual
Hull Assembly
To Next Page
Loading...
Need help?
General