ENGINE DISASSEMBLY / ASSEMBLY
4.12
2004 Four Stroke PWC Service Manual
THERMOSTAT HOUSING ASSEMBLY
SNAP RING
(CHAMFER FACES OUT)
ELBOW PIPE
O--RING
THERMOSTAT
O--RING
O--RING
WATER PIPE
BLEED HOSE FITTING
INTAKE--SIDE OF ENGINE
= COOLANT FLOW WHEN THERMOSTAT OPENS
ASSEMBLY NOTES
Water Pipe Fastener Torque: 7 ft.lbs. (10 Nm)
Thermostat Opening Temperature: 180_F/82_C
Snap ring chamfer faces outward, towards rear of engine.
Always use new o--rings during installation and reassembly.
Elbow pipe points down and toward the heat exchanger .
WATER PIPE FASTENERS
M6 X 20
To Next Page
Loading...
Need help?
General